The Users Guide section will walk you through 6 steps for learning how to disassemble your Nova

Note: There’s glass laser tube inside the laser machine, be careful and do not collide with anything when moving.

Please do as following:

1. Remove the front door, the honeycomb table and the blades. (To reduce the weight and make it easier to move)

2.Remove the Tower Alarm Lamp;

PS ： disconnect the wire from the connector （ 24V4 to green ； 24V5 to red ； 0V3 to black ）

3. Fix the top lid.

4. Unscrew all the screws at the foot stand. There are 8 screws on each side.

5. Move the machine upper part with a trolley

6. After moving all the parts to your room, please reassemble them by fix 8 screws on each side.

End