Class 1 Nova – Laser System
Class 1 laser cutter comes with the same features as Nova laser cutter such as motorized table, Hybrid servo motor, air assist, smart board etc. And the main difference is that the Class 1 safty systems have safety circuit, which is designed to meet CE Class 1 standard. It will cut the power supply when users were detected to use the laser improperly. If your circumstance requires a safer laser machine, this model can meet your needs.
 |
 |
 |
Standard Features
Technical Specifications
| Laser System | NOVA 24 Class 1 | NOVA 35 Class 1 | NOVA 51 Class 1 | NOVA 63 Class 1 | ||
| Laser Tube Wattage | 40-60Watt | 80-130Watt | 100-130Watt | 100-150Watt | ||
| Work Area | 600x400mm(23.6″ x 15.7″) | 900x600mm(35.4″ x 23.6″) | 1300x900mm(51.2″x35.4″) | 1600x1000mm(63.0″x39.4″) | ||
| Max Part Size (WxLxH) | Front door closed | 700x530x170mm(27.6″ x 20.9″ x6.7″) |
1000x730x230mm(39.4″ x 28.7″ x9.0″) |
1400x1030x230mm(55.1″ x 40.6″ x9.0″) |
1700x1130x230mm(66.9″ x 44.5″ x9.0″) |
|
| Pass-through door | 700x∞x15mm(27.6″ x ∞” x 0.6″) |
1000x∞x20mm(39.4″ x ∞” x0.8″) |
1400x∞x20mm(55.1″ x ∞” x0.8″) |
1700x∞x20mm(66.9″ x ∞” x0.8″) |
||
| Table Size | 700x530mm(27.6″ x 20.9″) | 1000x730mm(39.4″ x 28.7″) | 1400x1030mm(55.1″ x40.6″) | 1700x1130mm(66.9″ x 44.5″) | ||
| Z Axis Height | 155mm(6.1″) | 230mm(9.1″) | 230mm(9.1″) | 230mm(9.1″) | ||
| Dimensions(WxDxH) | 1070x790x610mm(42.1″ x 31.1″ x24″) |
1500x1105x1040mm(59.1″ x 43.5″ x40.9″) |
1900x1405x1040mm(74.8″ x 55.3″ x40.9″) |
2200x1505x1040mm(86.6″ x 59.3″ x40.9″) |
||
| Net Weight | 130kgs(287lbs) | 310kgs(683lbs) | 430kgs(948lbs) | 470kgs(1036lbs) | ||
| Laser Type | Sealed Co2 Glass Laser Tube | |||||
| Cooling | Water Cooled | |||||
| Motion Control System | High-Speed Hybrid servo motor | |||||
| Maximum Speed | 1000mm/S(39.4 IPS) | |||||
| Speed and Power Control (engraving depth) | Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping. | |||||
| Operating Modes | Optimized raster, vector, and combined mode | |||||
| Resolution(DPI) | User controlled from 100 to 500DPI(standard laser head), up to 1000 DPI(HR head) | |||||
| Computer Interface | Ethernet and USB Connection | |||||
| Compatible Operating Systems | Windows XP/2000/Vista/7/8/10 | |||||
| Buffer Memory | 128MB Standard | |||||
| Display Panel | 3.5″ LCD panel showing current file, total working time, laser power, speed etc. | |||||
| Electrical Requirements | 110 to 240 volts, 50 or 60 Hz, single phase | |||||
| Ventilation System | Integral exhaust fan.There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case. | |||||
| Standard Features | Red dot pointer, Auto focus, Motorized table, Pass-through Door, Air Assist, Water pump ,Exhaust fan, HoneyComb Table, 2″ (50.8 mm) Focus Lens, Easily adjustable Home position, LCD Display,3D Engraving ,”No water” protection, Emergency stop, Maintenance mode, Open cover protection,Hybrid servo motor | |||||
| Optional Features | ||||||
| High Resolution Head | Increase the resolution up to 1000DPI | |||||
| Rotary Axis | Use to engrave on round items | |||||
| Water Chiller | Improve the cooling of laser tube | |||||
Machine Size
Optional Items
When the laser tube is working, it will produce a large amount of heat.Since the water chiller has the refrigerating capacity and can adjust the temperature intelligently to keep the temperature within a certain range, there by to ensure the stability of laser working.
Rotary engraving equipment was used to extending THUNDERLASER system application, as a optional component, It can be used for cutting and engraving round items…
Heat Alarm Detector
A thermal detector is designed for areas where a fire will be more flame and heat than smoke; areas such as laser cutter and engraver, kitchens, garages and workshops. The small thermal heat detector will also have a 10 year, long life battery…
We named Hight-Resolution head as HR head for short,it’s made by special structure for focusing the laser bean into a much smaller dot,thus we can get more tiny laser dots in a unit area,and the engraving result will be more elaborate…
4″ laser head owns a longer focal distance than 2″ standard head, thus for cutting thick material, it makes the cutting edge more smooth and straight…
The high pressure and low noise air compressor offered by Thunder Laser co2 laser engraving machine includes two parts: the high pressure and low noise air compressor and the water separator…
Materials
If your material is not in the below list, our Applications Team would be happy to assist you to test it.
| Materials | Engrave | Cut |
| Wood | √ | √ |
| Acrylic | √ | √ |
| Delrin |
√ |
√ |
| Cloth |
√ |
√ |
| Leather | √ | √ |
| Mat Board | √ | √ |
| Melamine |
√ |
√ |
| Paper | √ | √ |
| Mylar | √ | √ |
| Pressboard | √ | √ |
| Rubber | √ | √ |
| Wood Veneer | √ | √ |
| Fiberglass | √ | √ |
| Plastic | √ | √ |
| Cork | √ | √ |
| Corian | √ | √ |
| Twill | √ | √ |
| Anodized Aluminum | √ | X |
| Painted Metals | √ | X |
| Tile | √ | X |
| Glass | √ | X |
| Coated Metals | √ | X |
| Ceramics | √ | X |
| Marble | √ | X |
| Stainless Steel | * | X |
| Brass | * | X |
| Titanium | * | X |
| Bare Metal | * | X |
* means the laser cannot engrave directly, you will need the help of the “thermark spray”, you can visit www.thermark.com for more information.
Video
FAQ
http://www.thunderlaser.in/how-to-use-your-laser-machine/how-to-setup-your-mini60-laser-system.html
http://www.thunderlaser.in/how-to-use-your-laser-machine/how-to-setup-your-nova-laser-cutter.html
http://www.thunderlaser.in/video/what-laser-cutter-can-create.html
http://www.thunderlaser.in/video/how-to-use-your-laser-machine.html
http://www.thunderlaser.in/video/how-to-use-your-laser-software.html
http://www.thunderlaser.in/video/how-to-use-your-laser-software.html